USED FOR LIQUIDS OR AIR. CUSTOMIZABLE COMPONENTS.
Easily mounted in-line and ideal for liquid or air, our Series 200 NPT check and pressure relief valves eliminate the leak prone adapter seen in other valves by combining the fitting and check valve in one piece. Series 200 valves are ideal for applications that require threading and involve vibrations, torquing, or any high-stress environment. Compression fitting Model #224 is available for use with Models #212 and #214 on inlet and outlet sides. Model #214 - 1/8" size may be combined with Model #212 - 1/4" size or you can use the same NPT on both ends. At Smart Products USA, all of our valves are customizable by plastic body material, o-ring material, and opening spring pressure to meet a specific application criteria.
Male NPT - 1/8"
Overall Size
0.67"
Length
1.37"
Body Materials:
Polypropylene, Nylon, ABS
O-ring Options:
Buna-N, EPDM, Viton®, Silicone, Fluorosilicone
Spring Pressure:
0.09 - 20 PSI
Male NPT - 1/4"
Overall Size
0.67"
Length
1.37"
Body Materials:
Polypropylene, Nylon, ABS
O-ring Options:
Buna-N, EPDM, Viton®, Silicone, Fluorosilicone
Spring Pressure:
0.09 - 20 PSI
May combine Model #212 and #214 or use the same NPT on both ends
1/4" Compression Fitting for use with #212 or #214 on inlet or outlet sides
Size O.D.
0.713"
Length
0.625"
Body Materials:
Polypropylene
Metric M10 with NPT - 1/8"
Overall Size
0.67"
Length
1.26"
Body Materials:
Polypropylene, Nylon, Acetal, PVDF
O-ring Options:
Buna-N, EPDM, Viton®, Silicone, Fluorosilicone
Spring Pressure:
0.09 - 20 PSI
Metric M10 with NPT - 1/4"
Overall Size
0.67"
Length
1.26"
Body Materials:
Polypropylene, Nylon, Acetal, PVDF
O-ring Options:
Buna-N, EPDM, Viton®, Silicone, Fluorosilicone
Spring Pressure:
0.09 - 20 PSI
Note: Dimensions on this page are based on Polypropylene material. These are typically held to a +/- 0.005" tolerance. Keep in mind different plastics have different shrink rates and may vary from these tolerances. Our products are subject to continuous improvement. To achieve this goal, Smart Products reserves the right to change features, processes, materials, testing and other specifications as necessary. All plastic body material recommendations are based on standard corrosion resistant and compatibility guides. Smart Products strongly recommends that customers test products for each application-specific use. Buyer is urged to test and investigate the compatibility of any substance used with our products prior to actual use. Seller will not be responsible for the failure of Buyer to thoroughly test and investigate the compatibility of the substances used with our products and the fitness of the products for its particular use or application.
© 2024. Smart Products USA, Inc. All rights reserved - Do not duplicate or redistribute in any form.
