Valves in ventilators for COVID-19 relief and beyond
Due to COVID-19’s notoriety to cause severe respiratory issues in older populations, Neonatal Rescue recently introduced the AdultLife™ Ventilator to the marketplace. An expansion upon their initial product, the NeoLife™ Ventilator (developed for newborns), this newer version is geared towards adult and pediatric patients.
Both devices rely on Smart Products USA’s check / pressure relief valves for accurate, reliable flow control. The NeoLife™ version (pictured above, right) uses the popular Series 300 Modular Valves, while the newer AdultLife™ Ventilator incorporates the cartridge Model #174. This custom-built solution is used as an emergency pressure relief valve to prevent excess pressure in the device in case of a malfunction or blockage of breathing tubes.
“We are using Smart Products’ valves because of the reliable lead time and because of the wide selection of materials and set pressures,” says Andy Armstrong with Neonatal Rescue.
Available to hospitals as a part of COVID-19 relief, the AdultLife™ Ventilator is a pressure-controlled, time-cycled ventilator. This medical application provides critical breathing support to patients experiencing acute respiratory distress syndrome (ARDS), pneumonia, or other complications requiring respiratory assistance. To learn more, visit https://www.neonatalrescue.org/.
About the Model #174
The Cartridge Model #174 Check/Pressure Relief Valve is a great flow control solution with an O.D. size at 3/4" (19.05mm). Additionally, this model, like all our valves, can be customized by plastic body material, o-ring, and opening PSI. Model #174 is available in Polypropylene, Nylon, PVDF, and ABS plastics. O-ring options include Buna-N, EPDM, Viton®, and Silicone. Available opening spring pressures range from 0.16 to 3 PSI.
About Series 300 Check / Pressure Relief Valves
Easily mounted in-line for liquid or air applications, our Series 300 Modular Check Valves combine the fitting and check valve in one piece. This series allows you to mix and match any two end fittings or use the same configuration on both ends. Available plastic options include Polypropylene, Nylon, PVDF, Ultem®, ABS, and Radel®. O-ring options are Buna-N, EPDM, Viton®, Silicone, Fluorosilicone, Aflas®, and Kalrez®. Opening spring pressures range from 0.11 to 20 PSI.
For expert technical assistance or to get started on building your own custom product, call 1-800-338-0404 or email email@example.com.